Home » Climate Pro K Series » Climate Pro K60

Climate Pro K60

Five tons of dependable spot cooling for people and electronics.

Taking slightly less than 12 sq. ft. of floor space, the Climate Pro K60 brings temperatures under control with 60,000 Btu/h of cooling capacity. It’s ideal when your application calls for a bigger response to keep employees and electronics from overheating.

  • Powerful performance. Runs on 208/230V 60 Hz with 50 amp circuit and uses 6.6 kW.
  • Dual condensers for effective cooling in temperatures from 65° to 105°F.
  • Integrated condensate pump sends collected water to the drain — no tanks to empty.

60,000 Btu/h

Cooling Capacity

1 Phase, 208/230V

Voltage

Climate Pro K60 - MovinCool

Find your local MovinCool dealer

Find a Dealer

Climate Pro K60 Features

Features that bring added value.

The Climate Pro K60 features advances that distinguish the entire Climate Pro Series—providing the utmost in safety and ease of operation.

See the features that distinguish the entire Climate Pro Series.

    Advanced features include:

    • Programmable electronics for automatic operation after hours and weekends.

    • Wireless connectivity-ready for remote monitoring and e-notifications.

    y

    Moderately quite, reliable operation.

    At the highest speed with condenser duct, sound level 69 dB(A).


    Electronic Features

    Control PanelProgrammable

    Cooling Capacity

    Rating Conditions: 95°F @ 60% RH60,000 Btu/h

    Electrical Characteristics

    Voltage Requirement (60 Hz)1 Phase, 208/230 V
    Total Power Consumption6.6 kW
    Current Consumption31.5 amps*
    Recommended Fuse Size50 amps
    NEMA Plug Configuration6-50
    Min. - Max. Voltage198 - 253 V

    Fans

    Motor Output 0.56 kW Evaporator
    0.30 kW x 2 Condensers

    Evaporator

    Fan TypeCentrifugal
    Max. Air Flow - High/Mid/Low1770/1710/1650 CFM
    Max External Static Pressure0.9 IWG

    Condenser

    Fan TypeCentrifugal
    Max. Air Flow - High/Mid/Low2400 CFM
    Max. External Static Pressure0.85 IWG

    Compressor

    TypeHermetic Rotary
    Output 3.45 kW

    Refrigerant

    TypeR-410A

    Dimensions

    W x D x H31 x 55 x 64 in

    Weight

    Net / Shipping582 / 683 lb

    Power Cord

    Gauge6 AWG (3-core)
    Length6 ft

    Condensate Tank

    Auto PumpIncluded

    Operating Conditions

    Min. - Max. @ 50% RH65° - 105°F

    Max. Duct Length

    Per Cold Duct Hose40 ft
    Hot Duct Hose100 ft

    Max. Sound Level

    With Condenser Duct - High/Mid/Low69/68/67 dB(A)
    Without Condenser Duct - High/Mid/Low71/70/69 dB(A)

    *Specification information shown with 230 V.

    Specifications subject to change without notice. All models feature compressor overload relay and fan motor protection. All models also feature compressor short-cycle protection, return air thermostat, automatic restart and accommodate a condensate pump kit.


    Images/Videos
    Callout No.
    Part No.
    Item
    Description
    -
    484350-1470
    Heat Exchanger Plenum
    Heat Exchanger Plenum for CPK60, CPK63
    1
    481170-0460
    Supply Air Flange Kit, 6-in dia.
    6-in diameter white metal flange with wire clamp and mounting screws. Use with supply air ducts.
    1A
    481170-0470
    Supply Air Flange Kit, 8-in dia.
    8-in diameter white metal flange with wire clamp and mounting screws. Use with Self-Supported Duct.
    1B
    481170-0490
    Supply Air Flange Kit, 6-in dia., Quick Connect type
    6-in diameter white metal flange with wire clamp and mounting screws. Quick Connect Type. Use with Nozzle Kit.
    2
    484209-0490
    Nozzle Kit, 6-in dia.
    6-in diameter plastic nozzle that extends up to 2 feet in length. Quick connect type. Includes trim ring.
    4
    LA481744-0400
    Self-Supported Duct, 6-in dia. Gray
    6-in adjustable diameter, gray plastic duct that extends from 6.5 to 10 feet in length.
    4A
    LA481744-0430
    Self-Supported Duct, 8-in dia., Gray
    8-in adjustable diameter, gray plastic duct that extends from 6.5 to 10 feet in length.
    4B
    LAY45810-0030
    Flexible Air Duct, 8-in dia.
    8-in diameter wire-reinforced, accordion-style duct in 25-ft lengths. Includes clamp.
    5
    481851-0210
    Trim Ring, 6-in dia.
    6-in diameter black plastic ring mounts as end caps for extension duct.
    6
    481769-0290
    Supply Air Nozzle Adapter Kit, 6-in dia.
    Adapter converts airflow from louvers to nozzles or air ducts. Up to four nozzles or air ducts.
    6A
    481769-0300
    Duct Adapter Kit, 8-in dia.
    Two-piece metal frame converts airflow from louvers to 8-in self-supported ducts or flexible air ducts. (Ducts and flange sold separately)
    8A
    LAY45820-0010
    Flexible Air Duct, 16-in dia. (not shown)
    16-in diameter wire-reinforced, accordion-style duct in 25-ft lengths. Includes clamp.
    10
    484350-1470
    Heat Exchanger Plenum
    Heat Exchanger Plenum for CPK60, CPK63
    12
    484350-1210
    Indoor Heat Exchanger Plenum
    Black plastic plenum for return air to evaporator.
    14
    484730-0020
    Condensate Tank
    Drain tank storage for condensation (comes standard on CPK36). Requires condensate float (comes standard on CPK36).
    14A
    484460-0010
    Condensate Float (not shown)
    Controls water level in condensate tanks. (For K60/K63 only)

    Accessory Applications

    Auto Condensate Removal

    Why bother with emptying the drain tank when you can install a condensate pump to remove the water automatically? This pump has a 17-ft lift capacity to reach virtually any remote drain. (Use of condensate tanks also requires the float).

    #
    Accessory
    Climate Pro K36
    Climate Pro K60 / K63
    11
    Condensate Pump Kit
    484789-0240
    Included
    14
    Condensate Tank
    Included
    484730-0020
    14A
    Condensate Float (not shown)
    Included
    484460-0010

    NOTE: All part numbers come with one part except where noted. All kits include additional pieces such as clamps and screws. See parts description box for more information.

    Outdoor Heat Exchanger Exhaust Air Removal

    MovinCool makes removing exhaust easy. Replace the existing ceiling tile with the MovinCool ceiling tile accessory. Place the self-supported or flexible duct on top of the unit and insert it into the ceiling tile (8A and 9A required).

    #
    Accessory
    Climate Pro K36 / K60 / K63
    8A
    Flexible Air Duct (not shown)
    LAY45820-0010
    9A
    Ceiling Tile, metal (not shown)
    484490-1040

    NOTE: All part numbers come with one part except where noted. All kits include additional pieces such as clamps and screws. See parts description box for more information.

    Outdoor Heat Exchanger Air Intake

    When balanced airflow is required, attach the outdoor heat exchanger plenum with a duct from the side of the unit to an outside air source. The air to the outdoor heat exchanger is pulled from outside the room to eliminate problems associated with negative air pressure. (8A, 9A and 10 required).

    #
    Accessory
    Climate Pro K36
    Climate Pro K60 / K63
    8A
    Flexible Air Duct, 16-in dia. (not shown)
    LAY45820-0010
    LAY45820-0010
    9A
    Ceiling Tile, metal (not shown)
    484490-1040
    484490-1040
    10
    Outdoor Heat Exchanger Plenum
    484350-1230
    484350-1240

    NOTE: All part numbers come with one part except where noted. All kits include additional pieces such as clamps and screws. See parts description box for more information.

    Spot or Remote Cooling

    To use the Climate Pro® K Series models to spot cool specific areas, use the nozzle adapter in place of the standard louvers. Attach self-supported or flexible air ducts to the adapter to cool remote hot spots. Trim rings give a finished look and keep the ducts from unraveling. To improve efficiency, use the outdoor heat exchanger plenum to recirculate cool air.

    #
    Accessory
    Climate Pro K36
    Climate Pro K60 / K63
    1
    Supply Air Flange Kit, 6-in dia. (a)
    481170-0460
    481170-0460
    1A
    Supply Air Flange Kit, 8-in dia.(b)
    481170-0470
    481170-0470
    1B
    Quick Connect Supply Air Flange Kit, 6-in dia. (c)
    481170-0490
    481170-0490
    2
    Quick Connect Supply Air Nozzle Kit, 6-in dia. (d)
    484209-0490
    484209-0490
    4
    Self-Supported Duct, 6-in dia. (e)
    LA481744-0400
    LA481744-0400
    4A
    Self-Supported Duct, 8-in dia. (f)
    LA481744-0430
    LA481744-0430
    4B
    Flexible Air Duct, 8-in dia.(f)
    LAY45810-0030
    LAY45810-0030
    5
    Trim Ring (g)
    481851-0210
    481851-0210
    6
    Supply Air Nozzle Adapter Kit, 6-in (h)
    481769-0290
    481769-0290
    6A
    Duct Adapter Kit, 8-in dia. (i)
    481769-0300
    481769-0300
    8A
    Flexible Air Duct (not shown) (j)
    LAY45820-0010
    LAY45820-0010
    12
    Indoor Heat Exchanger Plenum (k)
    484350-1330
    484350-1210

    REQUIRED ACCESSORIES: (a) 4, 5, and 6; (b) (4A and 6A) or (4B and 6A); (c) 2 and 6; (d) 1B and 6; (e) 1 , 5, and 6; (f) 1A and 6A; (g) 4; (h) (1B and 2) or (1, 4, and 5); (i) (1A and 4A) or (1A and 4B); (j) 12; (k) 8A.
    NOTE: All part numbers come with one part except where noted. All kits include additional pieces such as clamps and screws. See parts description box for more information.

    Unit Storage

    This durable unit cover is perfect for storage and transportation on an open truck. Made of black nylon oxford fabric, this cover is waterproof and mildew- and UV-treated for lasting service.

    #
    Accessory
    Climate Pro K36
    Climate Pro K60 / K63
    15
    Storage Cover
    LA484420-0850
    LA484420-0860

    NOTE: All part numbers come with one part except where noted. All kits include additional pieces such as clamps and screws. See parts description box for more information.

    Roll it in, Set it Up & Turn it on

    We're here for you.

    Our experts will help you determine which MovinCool products are best for your application—and provide answers for technical questions about your product. (Please have your unit’s serial number handy.)