Home » Heating & Cooling » Climate Pro D12

Climate Pro D12

Year-round utility with heating and cooling from a single unit.

The Climate Pro D12 heat pump is an all-in-one system for temperature control in any season. It delivers 11,450 Btu/h of cooling and 9,900 Btu/h of heating — with a space-saving footprint of just over 4 sq. ft.

  • Minimal electricity. Runs on 115V with 15 amp circuit and consumes just 1.38 kW (cooling) or 1.25 kW (heating).
  • Effective cooling in conditions from 65° to 95°F.
  • Provides heating in conditions from 24° to 80°F (with plenum and air entering outdoor heat exchanger).

11,450 Btu/h

Cooling Capacity

9,900 Btu/h

Heating Capacity

1 Phase, 115V

Voltage

Climate Pro D12 - MovinCool

Find your local MovinCool dealer

Find a Dealer

Climate Pro D12 Features

The value you expect.

Avoid downtime from overheated electronics and lost productivity from employee discomfort.

The Climate Pro D12 brings advanced design to give you the best in safety and ease of operation.

See all the features that distinguish the entire Climate Pro Series.

    Advanced features include:

    • Programmable electronics for automatic operation after hours and on weekends.
    • Wireless connectivity-ready for remote monitoring and e-notifications of performance.
    • Quick-connect nozzle for simple, time-saving setup.
    y

    Quiet, reliable operation.

    Quiet operation. At highest speed with condenser duct, sound level 61 dB(A) — about as much sound as an electric toothbrush.


    Electronic Features

    Control PanelProgrammable

    Cooling/Heating Capacity

    Rating Conditions:
    Cooling: 95°F @ 60% RH
    Cooling: 11,450 Btu/h
    Heating: Indoor @ 70°F / Outdoor @ 47°F @ 50% RHHeating: 9,900 Btu/h

    Electrical Characteristics

    Voltage Requirement1 Phase, 115 V, 60 Hz
    Total Power ConsumptionCooling: 1.38 kW, Heating: 1.25 kW
    Current ConsumptionCooling: 12.1 amps, Heating: 13.3 amps
    Recommended Fuse Size15 amps
    NEMA Plug Configuration5-15P
    Min. - Max. Voltage104 - 127 V

    Fans

    Motor Output0.055 kW Evaporator
    0.120 kW Condenser

    Indoor Heat Exchanger (Supply)

    Fan TypeCentrifugal
    Max. Air Flow - High/Mid/Low420/340/280 CFM
    Max. External Static Pressure0.31 IWG

    Outdoor Heat Exchanger (Exhaust)

    Fan TypeCentrifugal
    Max. Air Flow760 CFM
    Max. External Static Pressure0.19 IWG

    Compressor

    TypeHermetic Rotary
    Output 0.75 kW

    Refrigerant

    Type R-410A

    Dimensions

    W x D x H22 x 27 x 47 in

    Weight

    Net / Shipping181 / 218 lb

    Power Cord

    Gauge14 AWG (3-core)
    Length10 ft

    Condensate Tank

    Capacity5 gal

    Operating Conditions

    Min. - Max. @ 50% RHCooling: 65° - 95°F
    Heating:
    Without Plenum: 40°F - 80°F (Air entering indoor and outdoor heat exchangers)
    With Plenum: 40°F - 80°F (Air entering indoor heat exchanger) 24°F - 80°F (Air entering outdoor heat exchanger)

    Max. Duct Length

    Supply Duct Hose30 ft
    Exhaust Duct Hose100 ft

    Max. Sound Level

    With Condenser Duct - High/Mid/Low61/60/59 dB(A)
    Without Condenser Duct - High/Mid/Low62/61/60 dB(A)

    Specifications subject to change without notice. All models feature compressor overload relay and fan motor protection. All models also feature compressor short-cycle protection, return air thermostat, automatic restart and accommodate a condensate pump kit.


    Images/Videos
    Callout No.
    Part No.
    Item
    Description
    1
    481170-0450
    Supply Air Flange Kit, 5-in dia.
    5-in diameter white metal flange with wire clamp and mounting screws. Use with supply air ducts.
    1B
    481170-0480
    Supply Air Flange Kit, 5-in dia., Quick Connect type
    5-in diameter black plastic flange with mounting screws. Use with Quick Connect Nozzle Kit.
    2
    484209-0480
    Nozzle Kit, 5-in dia.
    5-in diameter plastic nozzle that extends up to 2 feet in length. Quick connect type. Includes trim ring.
    4
    LA481744-0420
    Self-Supported Duct, 5-in dia.
    5-in diameter, gray plastic duct that extends from 6.5 to 10 feet in length.
    5
    481851-0200
    Trim Ring, 5-in dia.
    5-in diameter black plastic ring mounts as end caps for extension duct.
    6
    481769-0280
    Supply Air Nozzle Adapter Kit, 5-in dia.
    Adapter converts airflow from louvers to nozzles or air ducts.
    8
    LA481744-0410
    Self-Supported Duct, 12-in dia.
    12-in diameter plastic duct that extends 6.5 to 10 feet in length
    8A
    LAY45771-0060
    Flexible Air Duct, 12-in dia. (not shown)
    12-in diameter wire-reinforced, accordion-style duct in 10-ft length for outdoor air exhaust. Includes clamp.
    9
    LA146373-8280
    Celling Tile Kit, 12-in hole, plastic
    24-in x 24-in plastic white tile with 12-in hole for exhaust air self-supported duct.
    10
    484350-1340
    Outdoor Heat Exchanger Plenum
    Black plastic plenum for return air to the outdoor heat exchanger.
    11
    484789-0210
    Condensate Pump Kit, 115V
    115V pump kit includes 3/8-in diameter x 20-ft length hose. Includes installation hardware. Maximum lift: 20 feet at 115V
    15
    LA484420-0840
    Storage Cover
    Durable black nylon oxford unit storage cover. Dimensions: 22-3/4 x 28-1/4 x 40-5/8 in

    Accessory Applications

    Auto Condensate Removal

    Why bother with emptying the drain tank when you can install a condensate pump to remove the water automatically? This pump has a 17-ft lift capacity to reach virtually any remote drain.

    #
    Accessory
    Climate Pro D12 / D18
    11
    Condensate Pump Kit
    484789-0210

    NOTE: All part numbers come with one part except where noted. All kits include additional pieces such as clamps and screws. See parts description box for more information.

    Exhaust Air Removal & Supply Air Intake

    MovinCool makes removing exhaust easy. Simply replace the existing ceiling tile with the MovinCool ceiling tile accessory. Place the self-supported or flexible duct on top of the unit and insert it into the ceiling tile. That’s all it takes. When balanced airflow is required, attach the outdoor heat exchanger plenum with a duct from the side of the unit to an outside air source. The air to the condenser is pulled from outside the room to eliminate problems associated with negative air pressure.

    #
    Accessory
    Climate Pro D12
    Climate Pro D18
    8
    Self-Supported Duct, 12-in dia. (a)
    LA481744-0410
    LA481744-0410
    8A
    Flexible Duct Kit, 12-in dia. (not shown) (b)
    LAY45771-0060
    LAY45771-0060
    9
    Ceiling Tile, plastic (c)
    LA146373-8280
    LA146373-8280
    9A
    Ceiling Tile, metal (not shown) (d)
    484490-1030
    484490-1030
    10
    Outdoor Heat Exchanger Plenum (e)
    484350-1340
    484350-1490

    REQUIRED ACCESSORIES: (a) 9 for exhaust air removal and 9 & 10 for supply air intake; (b) 9A for exhaust air removal and 9A & 10 for supply air intake; (c) 8 for exhaust air removal and 8 & 10 for supply air intake; (d) 8A for exhaust air removal and 8A & 10 for supply air intake; (e) (8 and 9) or (8A and 9A).
    NOTE: All part numbers come with one part except where noted. All kits include additional pieces such as clamps and screws. See parts description box for more information.

    Spot or Remote Cooling

    To use the Climate Pro D Series models to spot cool or heat-specific areas, use the nozzle adapter in place of the standard louvers. Attach supply air extension ducts to the adapter to cool or heat remote spots. Trim rings give a finished look and keep the ducts from unraveling.

    #
    Accessory
    Climate Pro D12
    Climate Pro D18
    1
    Supply Air Flange Kit * (f)
    481170-0450
    481170-0450
    1B
    Quick Connect Supply Air Flange Kit * (g)
    481170-0480
    481170-0480
    2
    Quick Connect Supply Air Nozzle Kit * (h)
    484209-0480
    484209-0480
    4
    Self-Supported Duct, 5-in. dia. (i)
    LA481744-0420
    LA481744-0420
    5
    Trim Ring (j)
    481851-0200
    481851-0200
    6
    Supply Air Nozzle Adapter Kit (k)
    481769-0280
    481769-0280
    12
    Indoor Heat Exchanger Plenum (l)
    484350-1190
    484350-1200

    * Order one or two parts depending on if one or two nozzles, flanges or ducts are needed.
    REQUIRED ACCESSORIES: (f) 4, 5, and 6; (g) 2 and 6; (h) 1B and 6; (i) 1, 5, and 6; (j) 4; (k) (1B and 2) or (1, 4 and 5); (l) 8 or 8A.
    NOTE: All part numbers come with one part except where noted. All kits include additional pieces such as clamps and screws. See parts description box for more information.

    Unit Storage

    This durable unit cover is perfect for storage and transportation on an open truck. Made of black nylon oxford fabric, this cover is waterproof and mildew- and UV-treated for lasting service.

    #
    Accessory
    Climate Pro D12
    Climate Pro D18
    15
    Storage Cover
    LA484420-0840
    LAY84420-0690

    NOTE: All part numbers come with one part except where noted. All kits include additional pieces such as clamps and screws. See parts description box for more information.

    Roll it in, Set it Up & Turn it on

    We're here for you.

    Our experts will help you determine which MovinCool products are best for your application—and provide answers for technical questions about your product. (Please have your unit’s serial number handy.)