Climate Pro K18
Compact spot cooling.
With a footprint of slightly over 4 sq. ft., the Climate Pro K18 delivers 16,800 Btu/h of cooling relief. It’s ideal for helping people stay comfortable and productive—and for keeping sensitive electronics from overheating and failure.
- Little power requirement. Runs on 115V/20 amp circuit and uses 1.7 kW.
- Cooling support effective in conditions from 65° to 95°F
16,800 Btu/h
Cooling Capacity
1 Phase, 115V
Voltage
Find your local MovinCool dealer
Find a Dealer
Climate Pro K18 Features
Features that bring you added value
With Climate Pro K18 you get advances that distinguish the entire Climate Pro Series—reassurances of safety and ease of operation.
See the features that distinguish the entire Climate Pro Series.
Advanced features include:
-
Programmable electronics for automatic operation after hours and weekends.
-
Wireless connectivity-ready for remote monitoring and e-notifications of performance.
Quiet, reliable operation.
Quiet operation. At highest speed with condenser duct, sound level is 63 dB(A) — similar to levels of a conversation with friends.
Electronic Features |
|
| Control Panel | Programmable |
Cooling Capacity |
|
| Rating Conditions: 95°F @ 60% RH | 16,800 Btu/h |
Electrical Characteristics |
|
| Voltage Requirement (60 Hz) | 1 Phase, 115 V |
| Total Power Consumption | 1.7 kW |
| Current Consumption | 14.5 amps |
| Recommended Fuse Size | 20 amps |
| NEMA Plug Configuration | 5-20 |
| Min. - Max. Voltage | 104 - 127 V |
Fans |
|
| Motor Output | 0.23 kW |
Evaporator |
|
| Fan Type | Centrifugal |
| Max. Air Flow - High/Mid/Low | 540/500/440 CFM |
| Max. External Static Pressure | 0.31 IWG |
Condenser |
|
| Fan Type | Centrifugal |
| Max. Air Flow - High/Mid/Low | 770/710/630 CFM |
| Max. External Static Pressure | 0.23 IWG |
Compressor |
|
| Type | Hermetic Rotary |
| Output | 0.9 kW |
Refrigerant |
|
| Type | R-410A |
Dimensions |
|
| W x D x H | 22 x 27 x 47 in |
Weight |
|
| Net / Shipping | 172 / 229 lb |
Power Cord |
|
| Gauge | 12 AWG (3-core) |
| Length | 10 ft |
Condensate Tank |
|
| Capacity | 5 gal |
Operating Conditions |
|
| Min. - Max. @ 50% RH | 65°- 95°F |
Max. Duct Length |
|
| Per Cold Duct Hose | 25 ft |
| Hot Duct Hose | 60 ft |
Max. Sound Level |
|
| With Condenser Duct - High/Mid/Low | 63/61/59 dB(A) |
| Without Condenser Duct - High/Mid/Low | 65/63/60 dB(A) |
Specifications subject to change without notice. All models feature compressor overload relay and fan motor protection. All models also feature compressor short-cycle protection, return air thermostat, automatic restart and accommodate a condensate pump kit. |  |
Images/Videos |
Callout No. |
Part No. |
Item |
Description |
|---|---|---|---|---|
1 |
481170-0450 |
Supply Air Flange Kit, 5-in dia. |
5-in diameter white metal flange with wire clamp and mounting screws. Use with supply air ducts. |
|
1B |
481170-0480 |
Supply Air Flange Kit, 5-in dia., Quick Connect type |
5-in diameter black plastic flange with mounting screws. Use with Quick Connect Nozzle Kit. |
|
2 |
484209-0480 |
Nozzle Kit, 5-in dia. |
5-in diameter plastic nozzle that extends up to 2 feet in length. Quick connect type. Includes trim ring. |
|
4 |
LA481744-0420 |
Self-Supported Duct, 5-in dia. |
5-in diameter, gray plastic duct that extends from 6.5 to 10 feet in length. |
|
5 |
481851-0200 |
Trim Ring, 5-in dia. |
5-in diameter black plastic ring mounts as end caps for extension duct. |
|
6 |
481769-0280 |
Supply Air Nozzle Adapter Kit, 5-in dia. |
Adapter converts airflow from louvers to nozzles or air ducts. |
|
8 |
LA481744-0410 |
Self-Supported Duct, 12-in dia. |
12-in diameter plastic duct that extends 6.5 to 10 feet in length |
|
8A |
LAY45771-0060 |
Flexible Air Duct, 12-in dia. (not shown) |
12-in diameter wire-reinforced, accordion-style duct in 10-ft length for outdoor air exhaust. Includes clamp. |
|
9 |
LA146373-8280 |
Celling Tile Kit, 12-in hole, plastic |
24-in x 24-in plastic white tile with 12-in hole for exhaust air self-supported duct. |
|
9A |
484490-1030 |
Ceiling Tile, 12-in hole, metal |
24-in x 24-in sheet metal tile with 12-in hole and built-in flange for exhaust air flexible duct kit |
|
10 |
484350-1430 |
Outdoor Heat Exchanger Plenum |
Black plastic plenum for return air to condenser. Hinged for filter cleaning. |
|
11 |
484789-0210 |
Condensate Pump Kit, 115V |
115V pump kit includes 3/8-in diameter x 20-ft length hose. Includes installation hardware. Maximum lift: 20 feet at 115V |
|
12 |
484350-1190 |
Indoor Heat Exchanger Plenum |
Black plastic plenum for return air to evaporator. |
|
15 |
LA484420-0840 |
Storage Cover |
Durable black nylon oxford unit storage cover. Dimensions: 22-3/4 x 28-1/4 x 40-5/8 in |
Accessory Applications
Auto Condensate Removal
Why bother with emptying the drain tank when you can install a condensate pump to remove the water automatically? This pump has a 17-ft lift capacity to reach virtually any remote drain.
# | Accessory | Climate Pro K12 / K18 | Climate Pro K24 |
|---|---|---|---|
11 | Condensate Pump Kit | 484789-0210 | 484789-0220 |
NOTE: All part numbers come with one part except where noted. All kits include additional pieces such as clamps and screws. See parts description box for more information.
Outdoor Heat Exchanger Exhaust Air Removal
MovinCool makes removing exhaust easy. Replace the existing ceiling tile with the MovinCool ceiling tile accessory. Place the self-supported or flexible duct on top of the unit and insert it into the ceiling tile.
# | Accessory | Climate Pro K12 / K18 / K24 |
|---|---|---|
8 | Self-Supported Duct, 12-in dia. (a) | LA481744-0410 |
8A | Flexible Air Duct (not shown) (b) | LAY45771-0060 |
9 | Ceiling Tile, plastic (c) | LA146373-8280 |
9A | Ceiling Tile, metal (not shown) (d) | 484490-1030 |
REQUIRED ACCESSORIES: (a) 9, (b) 9A, (c) 8, (d) 8A.
NOTE: All part numbers come with one part except where noted. All kits include additional pieces such as clamps and screws. See parts description box for more information.
Outdoor Heat Exchanger Air Intake
When balanced airflow is required, attach the outdoor heat exchanger plenum with a duct from the side of the unit to an outside air source. The air to the outdoor heat exchanger is pulled from outside the room to eliminate problems associated with negative air pressure.
# | Accessory | Climate Pro K12 / K18 | Climate Pro K24 |
|---|---|---|---|
8 | Self-Supported Duct, 12-in dia. (e) | LA481744-0410 | LA481744-0410 |
8A | Flexible Air Duct (not shown) (f) | LAY45771-0060 | LAY45771-0060 |
9 | Ceiling Tile, plastic (g) | LA146373-8280 | LA146373-8280 |
9A | Ceiling Tile, metal (not shown) (h) | 484490-1030 | 484490-1030 |
10 | Outdoor Heat Exchanger Plenum (i) | 484350-1160 | 484350-1170 |
REQUIRED ACCESSORIES: (e) 9 and 10, (f) 9A and 10, (g) 8 and 10, (h) 8A and 10, (i) (8 and 9) or (8A and 9A).
NOTE: All part numbers come with one part except where noted. All kits include additional pieces such as clamps and screws. See parts description box for more information.
Spot or Remote Cooling
To use the Climate Pro® K Series models to spot cool specific areas, use the nozzle adapter in place of the standard louvers. Attach self-supported or flexible air ducts to the adapter to cool remote hot spots. Trim rings give a finished look and keep the ducts from unraveling. To improve efficiency, use the outdoor heat exchanger plenum to recirculate cool air.
# | Accessory | Climate Pro K12 / K18 | Climate Pro K24 |
|---|---|---|---|
1 | Supply Air Flange Kit (j) | 481170-0450 | 481170-0450 |
1B | Quick Connect Supply Air Flange Kit (k) | 481170-0480 | 481170-0480 |
2 | Quick Connect Supply Air Nozzle Kit (l) | 484209-0480 | 484209-0480 |
4 | Self-Supported Duct, 5-in dia. (m) | LA481744-0420 | LA481744-0420 |
5 | Trim Ring (n) | 481851-0200 | 481851-0200 |
6 | Supply Air Nozzle Adapter Kit (o) | 481769-0280 | 481769-0280 |
12 | Indoor Heat Exchanger Plenum (p) | 484350-1190 | 484350-1200 |
REQUIRED ACCESSORIES: (j) 4, 5 and 6, (k) 2 and 6, (l) 1B and 6, (m) 1, 5 and 6, (n) 4, (o) (1B and 2) or (1, 4 and 5), (p) 8 or 8A.
NOTE: All part numbers come with one part except where noted. All kits include additional pieces such as clamps and screws. See parts description box for more information.
Unit Storage
This durable unit cover is perfect for storage and transportation on an open truck. Made of black nylon oxford fabric, this cover is waterproof and mildew- and UV-treated for lasting service.
# | Accessory | Climate Pro K12 / K18 | Climate Pro K24 |
|---|---|---|---|
15 | Storage Cover | LA484420-0840 | LAY84420-0690 |
NOTE: All part numbers come with one part except where noted. All kits include additional pieces such as clamps and screws. See parts description box for more information.
We're here for you.
Our experts will help you determine which MovinCool products are best for your application—and provide answers for technical questions about your product. (Please have your unit’s serial number handy.)